SimplySecure's Building Management System (BMS) brings HVAC, lighting, power, fire, security and utilities onto a single intelligent dashboard — so your facility team sees every system, controls it from anywhere, and catches problems before they turn expensive.
A Building Management System (BMS), sometimes called an Integrated Building Management System (IBMS), is the centralized software and hardware layer that senses, schedules, and controls everything running inside a property — HVAC, lighting, power, fire, security, and utilities — through a network of DDC controllers, field sensors, and actuators reporting into one dashboard. Instead of separate panels for every vendor and every system, your facility team gets one screen, one login, and one source of truth for how the building is actually performing.
What We Integrate
From the chiller plant to the front-door reader, we bring each system into the same platform so nothing runs — or fails — in isolation.
Automated scheduling, setpoint optimization, and demand-based ventilation across chillers, AHUs, and VAVs.
Occupancy- and daylight-linked dimming, zone scheduling, and automatic after-hours load shutdown.
Real-time sub-metering, DG/UPS synchronization, and peak-demand load forecasting.
Fire panel status, alarms, and evacuation triggers surfaced on the same dashboard as everything else.
Access control, CCTV events, and intrusion alarms correlated in one incident view.
Tank-level tracking, pump runtime logging, and early leak detection across the property.
Live lift status, dispatch efficiency, and fault alerts for every car in the bank.
Full building control and real-time alerts from a phone or tablet, on-site or off.
Every reading, alarm, and control point in the building lands on the same interface — not twelve different vendor apps. Our BMS platform speaks the protocols your equipment already uses, so legacy panels and new IoT sensors sit side by side on one map, one trend log, and one set of alerts.
Comfort and energy cost usually pull in opposite directions — our HVAC automation is built to stop that trade-off. Chillers, air handlers, and VAVs are scheduled to occupancy, optimized in real time, and diagnosed automatically the moment performance drifts.
Lighting and power draw are where a building leaks the most money the quietest way. We tie fixtures to occupancy and daylight sensors, meter every floor and tenant separately, and shift load away from peak-tariff windows automatically.
A fire alarm that doesn't talk to the door locks or the cameras is a fire alarm working alone. We connect detection, suppression, access control, and video into a single incident workflow, so one alarm event triggers the right response everywhere at once — automatically.
Scheduled maintenance recommended in 3 days
Weekly backup power test completed successfully
Today's consumption trending under target
The best time to fix a failing pump is before it fails, not during the flood. Our BMS pushes real-time alerts to the people who need them and tracks equipment health over time, so maintenance gets scheduled on data instead of guesswork.
Who We Build For
A hospital ICU and a residential clubhouse don't share the same control priorities. We scope every BMS integration around how the property actually operates.
Floor-wise HVAC, lighting, and access scheduled to occupancy and shift patterns.
Common-area automation, water and power tracking, and visitor-linked access from one society dashboard.
Guest-room automation and back-of-house monitoring that runs quietly without disrupting a stay.
Critical-area climate control, backup power monitoring, and fire integration built for uninterrupted care.
Footfall-aware HVAC and lighting across common areas, with tenant-wise energy billing.
Multi-building scheduling, energy tracking, and emergency PA integration across sprawling campuses.
Process-area climate control, utility monitoring, and fire suppression for high-value inventory zones.
Precision-cooling alerts, power redundancy monitoring, and 24/7 environmental logging.
How We Deploy
A structured five-step rollout that keeps your building running normally while we integrate it.
We map every system, panel, and protocol already running on-site before designing anything.
Controllers, sensors, and network architecture sized and mapped to BACnet/Modbus standards.
DDC panels, sensors, and actuators installed with minimal disruption to daily operations.
Every system is brought onto the dashboard and validated point-by-point before go-live.
Your facility team is trained on the platform, backed by SLA-based AMC support.
Why Facility Teams Choose Us
Four reasons commercial, residential, and institutional clients trust SimplySecure with their BMS.
Honeywell, Siemens, Schneider Electric, and Johnson Controls hardware, unified onto one open platform instead of four separate ones.
Redundant controllers, UPS-backed panels, and phased commissioning that never takes the whole building offline at once.
The same team that installs your fire and security systems builds the BMS layer that connects them.
From a single office floor to a multi-site portfolio, deployed and supported on one design standard.
Answers to the questions we hear most about Building Management System integration and rollout.
A BMS centralizes control of HVAC, lighting, power and energy metering, fire alarm status, access control and CCTV events, water and pump systems, and elevators — all monitored and operated from one dashboard instead of separate vendor panels.
In most cases, yes. We integrate new and existing fire, access control, and surveillance systems into the BMS platform using open protocols and vendor APIs, so alarms and events from older equipment still surface on the same dashboard.
No. We scale BMS deployments from a single residential society clubhouse to multi-building corporate campuses — the platform and the payback both scale with the size of the property.
Our platform is protocol-agnostic and supports BACnet/IP, Modbus RTU/TCP, OPC-UA, and vendor-specific APIs, so equipment from different OEMs can sit on the same integration layer without being replaced.
Savings depend on the building's current automation level, but occupancy-linked HVAC and lighting control, sub-metering, and peak-demand management typically produce meaningful, measurable reductions in energy spend — our engineers size the estimate during the site audit.
Timelines depend on building size and how many systems are being integrated, but our five-step process — audit, engineering, installation, commissioning, and handover — is phased so your building keeps operating normally throughout, with training and AMC support included at handover.
